ReTac WipeErase is a white dry erase film with a white gloss, hard coat finish with ReTac ultra removable adhesive. ReTac WipeErase has a chemical and scratch-resistant UV hard coat and a clear gloss surface that safeguards against ghosting or staining from ink. Its anti-graffiti properties also allows for easy removal of permanent marker, such as Sharpies.
Typical applications include indoor dry erase or planning boards, menu boards, conference room walls, courtroom graphic displays, maps, calendars, sports coaching, hospital message boards and many other applications where different information needs to be communicated.
When compared to other high quality dry erase boards, ReTac WipeErase is remarkably easy to erase. Its anti-graffiti properties also allow for easy removal of permanent marker with rubbing alcohol. ReTac WipeErase has ReTac on the back which allows removable dry erase graphics to stick to virtually any smooth surface and be removed cleanly years later!Make Enquiry
Retac WipeErase is a 6 mil (150μ) durable high quality dry erase film with a white gloss, hard coat finish and ReTac ultra removable adhesive protected by a PE coated Kraft release paper siliconized on the release side. Possessing anti-graffiti qualities, it offers a truly superior combination of resistance against scratches, abrasion, water, solvents, stains, and chemicals. This specialty film is for indoor use and not printable.
“Whiteboards often suffer from ‘ghosting’, making them look grey and shaded. In time, the pens used on these boards scratch the surface and when rubbed off leave a very faint impression of previous writing. Once this has happened, there is no way of repairing the whiteboard itself and so the ghosting needs to be put up with, or the board replaced. A sheet of one of our WipeErase products applied to a dry erase board essentially makes it as good as new and is considerably cheaper than replacing a whiteboard. Do this across a whole organisation and the savings could be huge.”
“WipeErase films and overlaminates are resistant to scratches, water, solvents, stains and chemicals and are very easy to handle, apply and remove. They are a flexible and great value solution to a broad range of indoor presentation requirements.”
“After speaking to 3 dealers for Roland printers we selected Sabur as they were extremely forecoming with advice on the various models which helped us select the right machine for us. The printer turned up on the day it was promised and when the installers left the building we started printing immediately and we haven’t looked back since…”
“In a difficult situation I research Dean at Saburink for assistance to purchase a 3.2m heat press at very short notice. From the initial call a new heat press was sourced, procured, installed and running within 72 hours of my initial call. Faultless, seamless and outstanding response, communication and understanding. Thank you Dean”
“This was the second printer we purchased from Sabur, after receiving great service on our first order we returned to Sabur to order our new Roland XF640. They did a great deal and worked to our schedule for the installation. On the day of the install, they were great and very patient whilst we had another company carefully deliver the printer through a first floor window. Once in the position the installation process began and with software updates for our system required, nothing was too much trouble even though time was getting on. The day finished when the printer was ready for use (at about 7:30pm, without complaints about the day running behind!). We have been using the printer for a few weeks now and we are extremely happy with it and the pre and post-sale service the team at Sabur offer! I will be certainly recommending them to my industry contacts and will be back (hopefully in the not too distant future) for my next machine.”
DryTac ReTac WipeErase white dry erase film Enquiry Form
special offers and used equipment
Prices that are too good to miss!take a look now