Diferro “DP” Series calender heat press has evolved and includes many unique new features. Diferro have created a truly cost-effective machine that is built to last, offers multiple configuration choices and the performance required for an efficient high-speed print finishing experience. Whilst mainly used for textile transfer printing, the DP Series can also be used for other heat transfer applications
The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.
All of our machines are equipped with 100% Nomex seamless industrial felt belts that are reinforced with Kevlar material in order to avoid stretching. The expected lifetime for the belt on this unit is between 3 & 5 years depending on use. In order to eliminate movement of the felt belt to either side the machine is built with an automated-felt centering mechanism. The felt tension and the felt centering system are both airoperated (Pneumatic). Should the compressor fail to supply the required air for the system, the machine halts and alerts the operator to prevent lasting damage to the belt
“After speaking to 3 dealers for Roland printers we selected Sabur as they were extremely forecoming with advice on the various models which helped us select the right machine for us. The printer turned up on the day it was promised and when the installers left the building we started printing immediately and we haven’t looked back since…”
“In a difficult situation I research Dean at Saburink for assistance to purchase a 3.2m heat press at very short notice. From the initial call a new heat press was sourced, procured, installed and running within 72 hours of my initial call. Faultless, seamless and outstanding response, communication and understanding. Thank you Dean”
“This was the second printer we purchased from Sabur, after receiving great service on our first order we returned to Sabur to order our new Roland XF640. They did a great deal and worked to our schedule for the installation. On the day of the install, they were great and very patient whilst we had another company carefully deliver the printer through a first floor window. Once in the position the installation process began and with software updates for our system required, nothing was too much trouble even though time was getting on. The day finished when the printer was ready for use (at about 7:30pm, without complaints about the day running behind!). We have been using the printer for a few weeks now and we are extremely happy with it and the pre and post-sale service the team at Sabur offer! I will be certainly recommending them to my industry contacts and will be back (hopefully in the not too distant future) for my next machine.”
special offers and used equipment
Prices that are too good to miss!take a look now